A restaurant kitchen pass with pans and a gas hob, illustrating restaurant energy costs

What Drives Restaurant Energy Costs, From Fridge to Fryer

Restaurant energy costs start long before the first cover

Restaurant energy costs are stubborn because so much of the kit never switches off. The walk in fridge hums through the night, the extraction runs all service, and the ovens are hot well before anyone’s ordered.

That makes a restaurant or cafe a different animal from a shop or an office. Two things decide restaurant energy costs: how much energy the kitchen gets through, and the price on the contract you signed, possibly in a hurry, the week you got the keys.

This guide takes both in turn, using British Gas’s guidance for restaurants and Ofgem’s rules on business energy contracts.

What uses the most energy in a restaurant?

Cooking equipment and refrigeration. British Gas, which supplies business energy, says those two typically consume the most in a restaurant, and that most restaurants use between 50,000 and 90,000 kWh a year depending on size and equipment.

That range is one supplier’s figure, not an official benchmark, so treat it as a rough guide. Your own annual usage is printed on your bill, and it’s the number every quote will be built on.

The useful part, if you’re trying to cut restaurant energy costs, is where the waste hides. Most of it isn’t dramatic. It’s a fridge door propped open through a busy service and a hood left running through the afternoon lull.

Where it goes What British Gas suggests
Refrigeration Keep fridge doors closed whenever possible, and keep the condensers and evaporators clean
Drinks fridges If they only store fizzy drinks, turn them off after hours
Extraction Switch off kitchen extraction hoods when they aren’t needed
Hot water Check the water temperature is at 60°C and insulate the hot water pipes
Heating and cooling Match the heating timer to when rooms are in use. Air conditioning is rarely needed below 24°C
Lighting Swap traditional bulbs for LEDs

On lighting, British Gas says installing the right lights could cut your lighting costs by up to 80%. That’s its claim, and what you’d save depends on what’s in the ceiling now.

Why the contract shapes restaurant energy costs as much as the kitchen

You can tune a kitchen for months and lose the lot to a bad contract. Business energy has no price cap, and the terms are nothing like the ones on your bill at home.

Ofgem lists what to know before you agree to anything: what type of contract it is, how long it runs, any fees, what protections you have, and whether a broker’s fee or commission is built into the price. It also says to find out what happens at the end, because that’s where restaurant energy costs tend to jump.

The new premises trap

Taking on a site someone else has just left is the classic way to overpay. Ofgem says you’re put on a deemed contract automatically when you move into premises without arranging a formal one, and that deemed rates are usually higher than negotiated contract rates.

So the meter starts charging from the day you take the lease, at a rate you never chose. If you’re mid fit out, with the fridges already on, that adds up before you’ve served a meal. Our guide to energy when you move business premises covers what to do in the first week.

What happens when a fixed deal ends

Ofgem describes two outcomes. Some suppliers move you to out of contract rates, which it says are usually more expensive than fixed term contracts. Others roll you into a new fixed term, usually 12 months, which may be at a higher rate.

Neither needs you to do anything, which is how restaurant energy costs creep up unnoticed. We’ve set the options side by side in our guide to fixed, variable and deemed business energy deals.

Does a restaurant count as a microbusiness?

Often, yes, and it’s worth checking, because the status brings protections that help when restaurant energy costs come up for renewal. Ofgem says you qualify with fewer than 10 employees and an annual turnover or balance sheet total of no more than £2 million.

There’s a second route that matters for hospitality. You also qualify if you use up to 100,000 kWh of electricity a year, or up to 293,000 kWh of gas. A busy restaurant with fifteen staff fails the headcount test, but may still pass on usage. Check each fuel against your bills.

If you do qualify, Ofgem says your supplier must:

  • provide clear information about your contract
  • provide information about renewal prices before your contract ends
  • limit termination notice periods to 30 days, on evergreen contracts only
  • acknowledge requests to end a contract within 5 working days, on evergreen contracts only

Those last two are worth reading twice. An evergreen contract is one that simply runs on with no end date. If you were rolled into a new fixed term instead, usually 12 months, you are inside a fixed contract and those two protections do not apply, so check which of the two you are actually on before you give notice.

Citizens Advice can help microbusinesses and small businesses with their energy contracts, and the Energy Ombudsman handles supplier complaints that haven’t been resolved. More detail is in our guide to microbusiness energy rights.

Before you sign a restaurant energy contract

  • Find your contract end date and put a reminder in the diary well ahead of it.
  • Pull a year of usage for each fuel, so quotes are based on what you actually burn.
  • Ask whether a broker’s commission is included in the unit rate.
  • Check whether you qualify as a microbusiness, by staff or by usage.
  • Read it before you agree. Ofgem says there’s no cooling off period after you agree to a business energy contract.

Using a broker or a comparison service

Buying through a broker can save time you don’t have, and how the broker is paid feeds into restaurant energy costs. Ofgem says most brokers are paid a commission by the energy supplier you choose, and that a broker paid this way must be a member of an approved redress scheme.

For comparison sites, Ofgem’s advice is to check whether the website receives commission from energy suppliers or other sources. That’s a fair question to ask us too. Switcheroo is a comparison service, and we’d rather you asked than assumed.

If you run a pub with a kitchen, some of this will sound familiar. Our pub energy bills guide covers cellars and long opening hours.

The kitchen fixes cut the units. The contract sets the price of every unit that’s left. Restaurant energy costs only really fall when you deal with both, and the second one takes a few minutes.

Frequently asked questions about restaurant energy costs

  • How much energy does a restaurant use in a year?
    • British Gas says most restaurants use between 50,000 and 90,000 kWh annually, depending on size and equipment. Your own figure is on your bill.
  • Is there a price cap on restaurant energy costs?
    • No. The price cap covers households. A restaurant pays the rates in its business contract, or deemed rates if it has no contract.
  • Can I cancel a business energy contract after signing?
    • Ofgem says there’s no cooling off period after you agree to a business energy contract, so check the term and fees first.
  • How do deemed rates affect restaurant energy costs?
    • Deemed rates are what you’re charged when you move into premises without arranging a contract. Ofgem says they’re usually higher than negotiated contract rates.

Sources

Checked 16 November 2026.

Secret Link